Employed IMPINJ R2000 RF Chips, up to 110dbm receiving sensitivity and the high performance makes this module more suitable for harsh application environment.
High stability and reliability, 60*24 hours high temperature of workstation, can work stably and continuous.
Remarkable performance with 8dbi RF antenna, can achieve a reading distance over 10m per single tag.
Remarkable performance in intensive taps reading can attain a taps identification rate of 400tags/s.
The smallest module volume (56.5*36.0*7.8 MM) in the same field and supply power of 3.7V--5V, it is especially suitable for handsets and other mobile devices.
Enhance noise suppression for reliable data capture.
High precision return signal strength (RSSI).

Product Electrical Parameters

NO.	Name	Parameters
1	Working Voltage	DC 3.7～5V
2	Working Current	1.5A
3	Standby Current	≤50mA
4	Sleep Current	≤1mA
5	Working Temperature	-25～+65℃
6	Working Humidity	≤95%(+25℃)
7	Storage Temperature	-40～+80℃
8	Tag Protocol	EPCglobal UHF Class 1 Gen 2 / ISO 18000-6C
9	Working Frequency	840～960 MHz
10	Supporting Working Areas	China 1,China 2 US, Canada and other regions following U.S. FCC Europe and other regions following ETSI EN 302 208 with & without LBT regulations Japan,Korea, Malaysia,Taiwan
11	RF IC	Impinj R2000
12	Output Power	Software adjustable, step interval 1.0dB, maximum 30dBm
13	Output Power Flatness	±0.2dBm
14	Receiving Sensitivity	-82dBm
15	RF Port Standing Wave	≤1.5
16	Reading Distance	≥10m(With 8dBi antenna/Relate to tags type, transmitted power and application environment)
17	Multi-tag Reading	≥400 tags/s
18	Antenna Interface Amount	one(MMCX)
19	Interface Communication Rate	115200bps
20	Working Temprature Detection	support
21	Intensive Read/Write Mode DRM	support
22	Antenna Connection Protection	support
23	RSSI	support
24	LED	Red light (power indicator )
25	Product Cooling Way	Aluminum metal case as cooling fin for the module
26	Dimension	56.536.07.8 MM

Interface Definition

Pin NO.	Name	Type	Description
1	UART_TX	I/O	TTL UART Transmit
2	UART_RX	I/O	TTL UART Receive
3	GPIO3	I/O	Output
4	GPIO2	I/O	Output
5	GPIO1	I/O	Output
6	PWREN_MODULE	I/O	When Pull Down This Pin to Ground,The Module Enter Sleeping Mode.
7	GND	Ground	Ground
8	GND	Ground	Ground
9	VCC	Power	DC 3.7V to 5V Power Input.
10	VCC	Power	DC 3.7V to 5V Power Input.

Inquiry Cart 0