Employed IMPINJ R2000 RF Chips, up to 110dbm receiving sensitivity and the high performance makes this module more suitable for harsh application environment.
High stability and reliability, 60*24 hours high temperature of workstation, can work stably and continuous.
Remarkable performance with 8dbi RF antenna, can achieve a reading distance over 10m per single tag.
Remarkable performance in intensive taps reading can attain a taps identification rate of 400tags/s.
Provide the most comprehensive functions SDK and ports, easy to integrate RFID software.
Adopted integrating RF chip, module performance is more stable, and more suitable for harsh application environment.
The use of carrier wave cancellation technology makes the tag reading more accurate and the reading scope wider.
The smallest module volume (56.5*36.0*7.8 MM) in the same field and supply power of 3.7V--5V, it is especially suitable for handsets and other mobile devices.
Enhance noise suppression for reliable data capture.
High precision return signal strength (RSSI).

Product Electrical Parameters

NO.	Name	Parameters
1	Working Voltage	DC 3.7～5V
2	Working Current	1.5A
3	Standby Current	≤50mA
4	Sleep Current	≤1mA
5	Working Temperature	-25～+65℃
6	Working Humidity	≤95%(+25℃)
7	Storage Temperature	-40～+80℃
8	Tag Protocol	EPCglobal UHF Class 1 Gen 2 / ISO 18000-6C
9	Working Frequency	840～960 MHz
10	Supporting Working Areas	China 1,China 2 US, Canada and other regions following U.S. FCC Europe and other regions following ETSI EN 302 208 with & without LBT regulations Japan,Korea, Malaysia,Taiwan
11	RF IC	Impinj R2000
12	Output Power	Software adjustable, step interval 1.0dB, maximum 30dBm
13	Output Power Flatness	±0.2dBm
14	Receiving Sensitivity	-82dBm
15	RF Port Standing Wave	≤1.5
16	Reading Distance	≥10m(With 8dBi antenna/Relate to tags type, transmitted power and application environment)
17	Multi-tag Reading	≥400 tags/s
18	Antenna Interface Amount	one(MMCX)
19	Interface Communication Rate	115200bps
20	Working Temprature Detection	support
21	Intensive Read/Write Mode DRM	support
22	Antenna Connection Protection	support
23	RSSI	support
24	LED	Red light (power indicator )
25	Product Cooling Way	Aluminum metal case as cooling fin for the module
26	Dimension	56.536.07.8 MM

Interface Definition

Pin NO.	Name	Type	Description
1	UART_TX	I/O	TTL UART Transmit
2	UART_RX	I/O	TTL UART Receive
3	GPIO3	I/O	Output
4	GPIO2	I/O	Output
5	GPIO1	I/O	Output
6	PWREN_MODULE	I/O	When Pull Down This Pin to Ground,The Module Enter Sleeping Mode.
7	GND	Ground	Ground
8	GND	Ground	Ground
9	VCC	Power	DC 3.7V to 5V Power Input.
10	VCC	Power	DC 3.7V to 5V Power Input.

Single Channel UHF RFID Module RFID Reader Long Distance CE / ROSH Approved

UHF RFID Reader